Rietsche GmbH - RIETSCHE Fully Automatic Foundation Sheet Machine

Start

Language

Our Services

Start

Sheet-metal-working

Foundation Sheet Machines

Service

Contact

Guestbook

Imprint

RIETSCHE Fully Automatic Foundation Sheet Machine

This machine makes it possible to produce foundation sheets in a single operation by the casting method. The liquid wax is fed to the machine from a tank with a capacity of approx. 130 kg (in case of need, tanks with a capacity of up to 250 kg are available) through an inlet tank. As the wax arrives between the cylinders, it congeals to form a wide foundation band that is cut to length and width on the attached cutting machine. The desired width is adjusted by moving the round knives as required, whereas the length is adjusted by means of a counting preselector, the preset figure being the length in millimetres.

Fully Automatic Foundation Sheet Machine

Deviations in length and width are less than 1 mm. The foundation sheets are stacked on a lifting table from which they can be removed for packing.

At low temperatures, cast foundation sheets are not as elastic as rolled foundation sheets.

Regular cell pattern of approx. 800 cells per dm² (square decimeter). Special cell patterns of 750 cells – 830 cells are available against extra charge. The cell pattern is reproduced on both sides.

Fully Automatic Foundation Sheet Machine (Detail)

Type	VA I	VA II
Size of cylinder	610 mm x 170 mm Ø	750 mm x 170 mm Ø
Output per hour in kg	Ca. 30-40	Ca. 40-50
Machine dimensions L x W x H	300 x 135 x 240 cm	300 x 150 x 240 cm
Net weight in kg	ca. 530	ca. 570
Price

Fully Automatic Foundation Sheet Machine (Detail)

[ Back ]